Features
1.Automatically turn on/off with PIR motion detection.
Durable and energy-saving, long lifespan, anti-mosquito dust.
High sensitivity, high light, low consumption, no stroboscopic, high color rendering index.
This product is suitable for: doorway, courtyard, gazebo, stairway, corridor, garden, etc.
2.High quality SMD lamp beads, high brightness, no flicker, no eye damage. A PIR sensor and a light sensor are built in, which automatically turns off during the day and turns on at night when motion is sensed. The bulb is a fully enclosed lampshade that does not accumulate dust and allows the mosquito to fly into the damaged lamp bead and chip, which is durable and beautiful.
3.Integrated intelligent IC, safer, more stable, no potential safety hazard. The color rendering index (CRI) of the bulb exceeds 85. The higher the CRI, the more realistic the naked eye looks.
PIR Motion Sensor Lamp
Base Tpye: E27
Voltage: AC85-265V AC110V AC220V
Power: 12W/15W/18W20W
Emitting Color: White/Warm White
Detection range: 1-6M
Sensor: Light sensor, PIR sensor
CIR: >85
Material: PC+ Aluminum
Life Span: >60000H
Certification: CE, RoHS,CCC
1.The sensor head faced to Exit or Entrance
2.The lamp should be kept far away from which temperature is high and sensitive place.
3.Not put any big object around it.
Work principle:
When you in sensor range, it works about 30 seconds.
After 30 seconds, if you not move, the lamp not work.
Too bright or in the day,the lamp doesn’t work.
It only works in dark environment or at night.
Trouble removal:
Occasionally it can auto light up, may be there’s animal moving or the install angle is not correct.
The lamp is turned off every 30 seconds, and repeat it, you have to check whether a person or an animal moves, or take it to another room to check.
Read before use
1. Find the motion sensor located at the tip of the bulb; make sure the sensor is facing the desired motion area within proper distance and angle;
2. Do not install the bulb in wet environment and high temperature. Keep it away from heaters,air conditioners,refrigerators, micro waves, stoves;
3. The bulb will only turn on while sense a motion in dark at proper distanced and angle;
4. Please make sure the sensor have a clear “view”of the area to work properly.It got the best results when you using it in a place without any type of cover.
5.Turn off the power BEFORE installation.
