☼ Natural Light，as natural as the sun
· Radar Sensor · Sensing distance 8-15m
① 0.1s ON：Lighting turn on time 0.1s
② Auto Delay Lighting Time
③ Leave the sensing distance，30s delay time
④ Applicable Temperature：-20℃-70℃
⑤ IP66 Waterproof
⑥ Light Sensor：Auto-sensing insufficient lighting
-The fastest delivery only takes 3-10 days to reach Russia and Europe.
Two Base models:
– Radar Sensor & Whitout Sensor
Three color temperatures:
– Radar Sensor：Cold White &Natural White
– Whitout Sensor：Cold White & Warm White
Sensing distance 8-15m
– Radar Sensing ：stronger sensing function
– Recommended installation height：3-6m
Make your home safer
– Radar can penetrate walls and obstacles, and the sensing effect is very penetrating.
! Please pay attention, but it cannot penetrate metal
0.1s ON – The Fastest Sensor
– Radar Sensor : More sensitive & More remarkable
Auto Delay Lighting
– Lightingt Method : When you move under the light, ‘it’ will keep on always!
Radar Senor & Floodlight →2 in 1
！Avoid damage of PIR Sensor
– Radar Sensor : -20℃-70℃（Wider application temperature range）
·Wall mounting · Ground mounting · Ceiling mounting
※20W(1800lm Light Area:5-10m²)
※30W(2100lm) Light Area:8-15m²)
※50W(4500lm Light Area:13-16m²)
※100W(9000lm Light Area:20-30m²)
– Radar Sensor : Cold White & Natural White
– Equipped with 1.5m EU Plug
– Ready to use after unpacking
!（Only for Radar Sensor Mordel）
!(The non radar sensing model does not have its own 1.5m EU plug)
– Without Sensor : Cold White & Warm White
Q: What is the difference between the three models of products？
A：Model one>> Radar Sensor：The most powerful model, sensor whitin 0.1 seconds, more sensitive and stronger
Model two>>Without Sensor：Connect the wire,control by the switch
Q:About trigger mode and delay time（ Radar Sensing）.
A:Moving objects can be triggered repeatedly.
The delay time is 30S, the sensor signal is received again within 30S, and the signal is superimposed again for 30S, and the light will always be on when the trigger is continuous and uninterrupted.
We will send the lamp with strong package, but sometimes it will have some problem,
if it have damaged or can’t work when your received,please take steps by following:
1.Send us a message and tell us what is wrong with the lamp.
2.Also attaching photos or possibly send us video of test.
By the two steps, we will solve the problem to you.
Please do not do when the lamp was damaged:
2.Give us negative feedback.